6X9 Speaker Template

It's a leftover from my previous setup and the car i'm using now has a 6x9 slot. Here is the thing though. It may only be a matter of enlarging the holes in the new 6x9 with a bigger drill bit so that you can get the mounting screw in place. Anything will be an improvement over stock so just find a good reputable company and enjoy. That said, i think there are some ribs on the backside of that speaker grill that vary in thinckness. Use your factory speaker as the template. Draw the mounting hole for the 6.5 on the template;

Looking for more fun printables? Check out our Internal Audit Template Word.

6X9 Speaker Template

The way i've done this in the past is: Unless someone takes the 6x8 out of my hand or it breaks soon, i'll keep using it. I would drill the 6x9 chassis to fit the factory mounting holes rather than drill more holes in the vehicle. So, does anybody have a drafting of the sizes that need to be cut out.

6X9 Speaker Template

Below are what i believe to be the correct parts. Draw the mounting hole for the 6.5 on the template; The way i've done this in the past is: I want to build a template to help cut out some parts for a 6x9 speaker. I want to get all.

Speaker Template Cut Out Printable Templates Free

Unless someone takes the 6x8 out of my hand or it breaks soon, i'll keep using it. Some 6x9's have extra holes in the chassis and sometimes slots. 6x9 to 6.5 speaker template thread starter xdatx; Mount the 6.5 on the template; Agreedm but i already have the speaker and.

6X9 Speaker Template

I'm going also put mounts on them so i can take them out of the cab and hook them on the bed whenever im hanging out at the beach. 6x9 to 6.5 speaker template thread starter xdatx; Yea i'd recommend the jbl's out of those two. I love the way.

6X9 Speaker Cut Out Template

It may only be a matter of enlarging the holes in the new 6x9 with a bigger drill bit so that you can get the mounting screw in place. Here is the thing though. It's a leftover from my previous setup and the car i'm using now has a 6x9.

6x9 Speaker Template Stencil Printable

Here is the thing though. I'm going also put mounts on them so i can take them out of the cab and hook them on the bed whenever im hanging out at the beach. I got 2 6x9's im about to put in my single cab truck. 6x9 to 6.5.

Not Too Difficult, And Not Too Expensive.

I love the way they sound, i found both sets for $100 so that was reasonable. Here is the thing though. Some 6x9's have extra holes in the chassis and sometimes slots. Draw the mounting hole for the 6.5 on the template;

I Would Drill The 6X9 Chassis To Fit The Factory Mounting Holes Rather Than Drill More Holes In The Vehicle.

It's a leftover from my previous setup and the car i'm using now has a 6x9 slot. Use your factory speaker as the template. Install was a snap, took about 1 hour to do all four doors. Use the 6x9 as a template and outline it on the wood;

It Doesnt Have Cutouts For 6X9'S In It So Im Just Making Boxes.

If you prefer to use aftermarket speaker adapters and harnesses, metra offers several products for this. Mount the 6.5 on the template; Unless someone takes the 6x8 out of my hand or it breaks soon, i'll keep using it. So, does anybody have a drafting of the sizes that need to be cut out.

Agreedm But I Already Have The Speaker And Don't Want To Spend On An Upgrade Yet.

I got 2 6x9's im about to put in my single cab truck. 6x9 to 6.5 speaker template thread starter xdatx; I want to get all of the bass out of the 6x9's thats why im going ported. I want to build a template to help cut out some parts for a 6x9 speaker.